Hřiště hrou s.r.o.

Fast response, excellent service. I recommend

The boy lost a finger joint on the slide !!!! That construction is bad! The requirements of this standard are not intended to reduce the knowledge that play contributes to a child's development. Its aim is to ensure a sufficient degree of safety when playing in, on or around the playground equipment and to avoid accidents that would lead to disability or fatal consequences (ČSN EN 1176–1: 2009). When selecting the material, the manufacturer should take into account the sources of entrapment hazards that may occur when the material is twisted during use. Bounded openings must not have any parts that converge downwards at an angle of less than 60 ° (ČSN EN 1176–1: 2009). Preventing the risk of entrapment is a very important aspect that concerns security. The device must be constructed in such a way that no openings present sources of danger of entrapment. The risks of capture are the so-called "unexpected obstacles" and are often source of serious injuries. In general, the device may only contain small openings into which the child cannot insert a part of the body, or large enough to safely pull the inserted part of the body. According to Act No. 102/2001 Coll. "safe product" means "a product which, under normal or reasonably foreseeable conditions of use, does not present a hazard for the period specified by the manufacturer or for the normal use, or the use of which poses only a minimal risk to the consumer in terms of safety and health protection". A safe product must meet the requirements of a special legal regulation and international agreements by which the Czech Republic is bound. If such a regulation does not exist for the product, a product that complies with the Czech technical standard is considered safe. It is important to mention that for the purposes of this Act, the person who modifies the product is considered a manufacturer, as well as other persons in the supply chain. influence on the properties of the product, ie for example the assembly company