Procometal - Kulkova 30

3.3/5 based on 3 reviews

Contact Procometal

Address :

Kulkova 30, 614 00 Brno-Maloměřice a Obřany, Czechia

Phone : 📞 +78
Postal code : 614
Categories :

Kulkova 30, 614 00 Brno-Maloměřice a Obřany, Czechia
R
Roman Žalčík on Google

O
Ondřej Martin on Google

Pondeli 19.10 v 9:49 Jsem panu Stranskému ( jednatel firmy ) předal kola na auto ( ALU, hliniky, liťáky ) stím že jsme byly domluvení na barvě ( stříbrná lesk ) ukazoval jsem mu tu barvu na kolech. Stím že zakázka bude udelana do pátku a že zavola. Co že jediné co z toho splnil bylo to že kola byla hotova do patku. Po telefonické domluvě jsem si pro ně prijel. Kola byla nastrikana špatnou barvou ( neukázal barevník, prostě nic! ) Což byla chyba pana Stránského na tom jsme se shodly a že to bere na sebe a do pondělí 26.10 to zpraví. V pondělí 26.10 mu volám jestli jsou kola hotova řekl že ano že si pro ně můžu přijet ale jak je tam několik vrstev tak je tam takový puchýřek velikosti 10 koruny a ať se přijdu podívat ale že kola jsou hotova a že si je můžu odvest. Bohužel během mého pracovniho vytížení jsem měl čas až za týden 2.11. 2020. V V pondělí jsem mu ráno ještě volal a domluvil se že přijedu. Když jsem přijel tak tak jsem nevedel co mám říct ji u 3 že 4 kol je roztečená barva je hrozně hnusná práce a musí se udělat znovu ! Načež pan Stránský odmítl převzít zodpovědnost za špatnou kvalitu ( když jsem chtěl aby kola opravil na svoje náklady tak řekl Ne! Že už do nich dál hodně peněz a času a ze to neudělá ) a když jsem si chtěl kola vzít bez zaplaceni protože neudělali práci kterou měly tak řekl že mi je nedá ať jdu. Vzal jsem si kola za 3000 Kč s obrovskou nevoli a pocitem že jsem okraden a i zklaman přístupu firmy a jednatele společnosti která na trhu tak dlouho. Takže za mě určitě nedoporučuji formu Procometal.
Monday 19.10 at 9:49 I handed over the wheels for the car (ALU, aluminum, cast iron) to Mr. Stranský (company executive) by agreeing on the color (silver gloss), I showed him the color on the wheels. That the order will be made by Friday and that he will call. What he fulfilled was that the wheels were done by the foot. After a telephone appointment, I came for them. The wheels were sprayed with the wrong color (he didn't show the coloring book, just nothing!) Which was Mr. Stránský's fault, we agreed on that and that he will take it on and will report it by Monday 26.10. On Monday 26.10 I call him if the bikes are ready he said that yes that I can come for them but as there are several layers there is such a blister of 10 crowns and let me come see but that the bikes are done and that I can take them away. Unfortunately, during my workload, I didn't have time until week 2.11. 2020. V On Monday morning I called him again and agreed to come. When I arrived I didn't know what to say to her at 3 that 4 rounds is a scattered color is a very disgusting job and has to be done again! Then Mr. Stránský refused to take responsibility for the poor quality (when I wanted him to repair the bikes at his own expense, he said No! That he would continue to put a lot of money and time into them) and when I wanted to take the bikes without paying because they did not do the job they did. they had said he wouldn't let me go. I took my bike for 3000 CZK with a huge reluctance and the feeling that I was robbed and even disappointed by the approach of the company and the executive of the company that has been on the market for so long. So I definitely don't recommend the Procometal form for me.
M
Martin Lišovský on Google

Děkuji za pomoc v době, kdy se jinde čeká na lakování i měsíc. I přes větší rozměry konstrukcí, které nebyly možny otryskat v Procometal našel p. Stránský řešení. Doporučil, nedalekou firmu KROMA, kde za den bylo otryskáno a převezeno k p. Stránskému, kde během dalšího dne bylo nalakováno. Celý proces zabral od prvního telefonátu 3 pracovní dny. Hodně mi to pomohlo při realizaci zakázky. Děkuji.
Thank you for your help at a time when painting is waiting for a month elsewhere. Despite the larger dimensions of the structures, which could not be blasted in Procometal, Mr. Stránský found a solution. He recommended the nearby company KROMA, where it was blasted in a day and transported to Mr. Stránský, where it was painted during the next day. The whole process took 3 working days from the first call. It helped me a lot in the implementation of the contract. Thank you.

Write some of your reviews for the company Procometal

Your reviews will be very helpful to other customers in finding and evaluating information

Rating *
Your review *

(Minimum 30 characters)

Your name *