Kotle MultiBio - Pod Nemocnicí 2489

We installed a Multibio hot air pellet boiler for heating two of our storage halls and it was an excellent choice for our purposes. We temper the warehouses to 16 degrees and we are surprised by the pleasant consumption. The boiler runs automatically, it is enough to clean once every few months, basically maintenance-free. It switches on 3 hours before the shift and switches off when the required temperature is reached or at the end of the shift. The company also designed air distribution to the second hall free of charge. I recommend to all interested parties.

Have a nice day I have a 2 year Multibio 30E boiler with a fuel tank and I can only recommend it. I heat small wood chips, once a week I select 1/2 bucket of ash because I have no automatic ash removal. Once a month, brush the inside of the boiler and burner with a brush, vacuum it, so it is almost maintenance-free. After a year of operation, the chimney sweep could hardly believe that we were drowning in it. The Multibio company really didn't lie, no smell from the chimney and fuel consumption that costs nothing (just my job) is really low. I used to have a Viadrus and had to flood, then the weather and the quality of the wood played a role. Today, just the thermostat in the living room or click the knob and go. Hot water from the boiler connected to the boiler and not to the electricity is also a plus, right? If nothing seriously breaks in the coming years and I'm not afraid of that either, because the Multibio company is perhaps on the phone all the time, and if you can't get advice over the phone, they will help in person. Not to forget, which was also a big saving of money, they trained my heating engineer during the implementation, who then connected the boiler himself without any problems. I'm happy to show someone to make their decision easier. So in two years I will add more experience with a really good boiler. Zdenek Marek

I spent a long time finding a boiler manufacturer that would satisfy me with my demands. I almost didn't believe that anyone could make a boiler that would meet what I wanted. In the end, I chose the Multibo company and I did well. Thanks to my supply of several types of fuel, I have no problem burning almost anything. I bought 3 boilers from the multibio company. In two family buildings, where my parents live, they heat with pellets and during 4 years of operation there was not a single problem. I have a third boiler in my house, where I tested several types of fuel (sawdust, fine wood chips of own production, pellets of own production, lump wood, straw pellets) and the boiler had no problem with combustion. Another big advantage is that most boiler manufacturers do not solve operational problems with you. As for the Multibio company, whenever I needed something (regarding dosing, settings, etc.) they were always very willing to help and the approach to customers perfect, which is quite unprecedented nowadays !!!

We have owned the Multibio 30 E / ES since 2016. The selection of a suitable boiler was about 3 years long process of information retrieval and planning. The decision to buy a boiler from Multibio was certainly a good choice for us. It meets what we expected from the new boiler and works as it should. Most would emphasize the design of the burner, which is on the market original and it was one of the things that convinced us to purchase. Approach the company before and during sales / installation perfect. We used the offer of a personal visit to the company in Rakovník with the opportunity to look into the production of boilers (I recommend) and test the boiler in a sample boiler room. The personal approach of a small business is also another positive. We have also one experience in solving a minor defect in the first season, when there was loosening (due to insufficient tightening of one of the nuts) attachment of one of the tubular springs in the boiler heat exchanger and subsequent deformation of the spring by the ash removal screw. Resolved one quick phone call and a photo and for two days we had a new spring home. I refused the offered trip technician, the banal exchange took about 2 minutes. For this experience I am glad I was able to verify how the company will approach in case of warranty / post-warranty service.

I operate the Multibio 30 boiler for the 3rd season. Unfortunately, I had to solve several problems during that time, so I am not one of the happier users ... The big advantages of the boiler certainly include its dimensions. Thanks to the multi-part construction and the weight of the boiler body not exceeding 300 kg, we moved it in two to the boiler room in the basement. Another boiler wouldn't have turned up there and I'd have to cut down the door frames. The construction of the boiler is very open and thanks to that it is easy to maintain and repair - however, in my case too often and so I would appreciate a simpler system for removing the burner hood. The first defect that occurred in my case was the creaking sound of the cylinder rotating from the boiler room to the bedroom. The technician called in did not solve the problem, but after a few tens of hours in the boiler room, in cooperation with a willing manufacturer, I managed to eliminate the defect and everything went perfectly until a little after 2 years left the ignition spiral. But Mr. Sinkule reacted very quickly (as is customary with him) and the next day I had a new spiral, I replaced it and we drove on. As for the fuel, at first I heated A2 wood pellets in the boiler, then I switched to 8 mm agropellets (straw, cleaning residues). The boiler handled the agropellets very well and rolled really big sintering from the burner, but after less than 2 seasons these pellets pierced my stainless steel insert (to my surprise and the manufacturer, who assured me that it would not happen with Multibie). So I decided to return to wood and for this season I bought oak / beech pellets Poland / Ukraine. The first 2-3 tons are fine, but then the flame in the burner started to go out - supposedly a bad batch, so now I have to mix the pellets with the better ones. As a result, Multibio lost my previous title "omnivorous boiler". However, it is good to note here that the boiler can be operated in emergency mode without electricity and heated in it with a classic piece of wood. If you have a adapted heating system, you can heat the gravity. However, a little soot is formed here - I have never seen soot or tar during normal operation on the above-mentioned pellets. The boiler is easy to clean. Depending on the type of pellets and operation, I clean once every 1-3 weeks. I've been through a lot with the boiler - probably more than I would like, and overall, my initial enthusiasm has now been replaced by a sense of insecurity as I wait to see what the boiler does again and when it deprives me of a few tens of hours of my time again. However, I still can't say that I wouldn't recommend the boiler - I have no experience with another machine and maybe I'm just unlucky.

Spick, trouble-free boiler. Friendly and helpful customer support that will help you both on weekdays and public holidays, from morning to night ?? Thanks again.

We use a boiler multibio 49+ in a guesthouse with 10 rooms (25 beds) and a restaurant for 100 guests. We have connected a 1000l hopper, auger and a set of AKU containers 2000l + 500 boilers to the boiler. On the part of the supplier, everything was fulfilled according to the agreement, communication was excellent, the boiler meets exactly what we expected. I definitely recommend the installation of a boiler room with heaters recommended by the supplier, everything went well and according to the agreement ... We heat with pellets, consumption for the time being as expected, after adjustment and setting the minimum need for maintenance - about 1 - 2 buckets of ash (for about 700kg of pellets): - ) Compared to the previous coal-fired boiler, it is an absolutely perfect and clean solution. I call the boiler room Mercedes :-)

We have been heating the family house with the MultiBio 30 ES boiler for the fifth season. In conjunction with a large hopper, pellet conveyor and automatic ash removal, the only concern is to refuel only once every approx. 1-2 months. Due to the unique design of the rotary burner, cheaper pellets of lower quality are enough, combustion is trouble-free. Automatic ignition and extinguishing of the boiler I have easily controlled thermostats from 1000L storage tank, so the boiler with 100% efficiency burns fuel only when it is really needed, ie without any attenuation, power reduction, excessive smoke from the chimney, etc. At a consumption of 5-6 tons then I export an ashtray with a volume of about 70 l only once a year (I also use the ash as a quality fertilizer in the garden)! At the same time, I very much appreciate the approach of the company's management and service. So far, we have always solved any minor problem with the maintenance or adjustment of the boiler over the phone, Mr. Sinkule will be happy and professional at any time, so a more skilled person will basically handle most of them himself without the need for a technician.